Locking The Tilt And/Or Backrest Angle Adjustment; Electric Tilt And Backrest Angle Adjustment; Symbols On The Hand Control; Backrest Angle Adjustment - Invacare rea azalea assist User Manual

4.6.3 Locking the tilt and/or backrest angle adjustment

A
B
The locking device A allows you to set the tilting of the seat
unit and/or the angling of the backrest to a fixed position.
1. Tilt and/or angle the seat and backrest to the desired
position.
2. Insert the locking device A.
The position is now set and cannot be changed.
To remove the locking device, press on the plastic peg B
with a small object and pull outwards.

4.7 Electric tilt and backrest angle adjustment

WARNING!
Risk of injury
If the wheelchair is used by confused or restless
users or users with spasms:
– either lock the hand control functions
– or make sure that the hand control is out of
reach for the user.
WARNING!
Risk of injury
When tilting the wheelchair, parts of the body
can be squeezed between the armrest base and
the rearwheel.
– Make sure that the distance between the
armrest base and the rearwheel is always 25
mm or more.
CAUTION!
Risk of damage to the product
– Make sure that the hand control is not
unintentionally activated.
– Do not let children play with the hand control.
– If anything unusual is observed, such as unusual
sounds or uneven running during operation,
shut down the system.
Risk of malfunction
– Work on the handset or other electric parts
(motors etc.) should only be carried out by
properly trained personnel.
When activating the On/Off button, a short "beep" confirms
that the hand control is activated. The hand control is active
1488727-M
in 30 seconds after the last action, before it is automatically
deactivated.
The hand control can also be manually deactivated
by pressing the On/Off button.
The force needed to press the buttons on the hand
control is 5 Nm (finger power).

4.7.1 Symbols on the hand control

Battery and charging indicator
Locking function
On/Off
Backrest recline (yellow color on arrow and
backrest)
Seat tilt (green color on arrow, backrest
and seat)
Up/Down (yellow color for the backrest
recline, green color for the seat tilt)

4.7.2 Backrest angle adjustment

A
B
C
Adjust the angle of the backrest by using the yellow buttons
on the left side of the hand control A.
1. Press button B to adjust the angle of the backrest
backwards.
2. Press button C to adjust the angle forwards.
Components
15