Azalea Minor - Harness; Harness Attachment - Azalea Base - Invacare rea azalea assist User Manual

Rea® Azalea®
5. To mount the lower straps, loosen the armrest
attachments with the screws C under the seat.
6. Pull out the attachments approx. 5 cm.
The strap mountings should be fastened from
the inside of the frame as shown above.
7. Insert the screw C through the eyelet and into the hole
in the frame.
Tools: 5 mm Allen key
8. Secure with washer and nut D.
9. Put the armrest attachment back in its original place.
The harness can also be adjusted with the straps by
the shoulders E.
5.22.2 Azalea Minor — harness
WARNING!
Risk of injury
– The harness has to be fitted and adjusted by a
trained therapist.
B
E
34
C
A
D
The harness is mounted on the headrest attachment.
1. Remove the screws for the headrest attachment A and
discard them.
2. Position washers and harness as shown above.
3. Insert new screws C through the eyelets into the
attachment B.
4. Tighten the screws.
5. To mount the lower straps, loosen the armrest
attachments with the screws D under the seat.
6. Pull out the attachments approx. 5 cm.
The strap-mountings should be fastened from
the inside of the frame (see above).
7. Insert the screw D through the eyelet and into the hole
in the frame.
Tools: 5 mm Allen key
8. Secure with the washer and nut E.
9. Put the armrest attachment back in its original place.
5.22.3 Harness attachment — Azalea Base
B
A
1. Loosen the handwheels for the push handles A.
2. Fit the harness attachment device B.
3. Put the handwheels back and tighten.
1488727-M