Acpi Settings - Contec EPC-2020 Series User Manual

ACPI Settings

Use this menu to specify ACPI power management settings.
Advanced
ACPI Settings
ACPI Sleep State
Resume On RTC Alarm
Figure 5.4. ACPI Settings
Table 5.5. ACPI Settings
Item
ACPI Sleep State
Resume On RTC Alarm
Table 5.6. Resume On RTC Alarm (Only Available When "Enabled" Is Selected)
Item
RTC Wake up Day
RTC Wake up Hour
RTC Wake up Minute
RTC Wake up Second
EPC-2020 Series User's manual
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
[Suspend Disabled]
[Disabled]
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Options
Suspend Disabled
S1 (CPU Stop Clock)
S3 (Suspend to RAM )
Disabled
Enabled
Options
1-31
0-23
0-59
0-59
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Description
Selects the ACPI sleep State used when the
system switches to the suspended state.
Do not change this setting.
Enables or disables the function for
automatically turning the system on at the
specified date and time. When this is
enabled, use the following items to set the
date and time at which the system will
automatically turn on.
Description
Sets the day at which the system will
automatically turn on. If this is set to 0,
the system will turn on each day.
Sets the hour at which the system will
automatically turn on.
Sets the minute at which the system will
automatically turn on.
Sets the second at which the system will
automatically turn on.
5. BIOS Setup
35