Table of Contents
Advertisement
6. Software RAID setup
Delete RAID Volume
You can use this menu to delete RAID drives.
Name
Level
*****
RAID1(Mirror)
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETE.
(This does not apply to Recovery volumes)
[↑↓]Select
RAID Drive [RAID 1(Mirror)] Deletion Procedure
This section contains the RAID drive deletion procedure. When deleting RAID drives, follow the
procedure shown below.
1. Turn the power on, and then start the RAID utility. For details on how to start the RAID utility, see
"Starting the setup screen" on page 623.
2. After the RAID utility starts, on the Main Menu, press the <Up Arrow> key and <Down Arrow> key
to move the cursor to "Delete RAID Volume", and then press <Enter>.
3. All RAID drives with mirroring constructions will be displayed. Press the <Up Arrow> key and
<Down Arrow> key to move the cursor to the RAID drive to delete, and then press <DEL>.
4. A message will be displayed regarding deleting the selected RAID drive. Press <Y>.
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Are you sure you want to delete "Drive name?" (Y/N):
5. The RAID drive will be deleted from "RAID Volumes" on the Main Menu. Under "Physical Disks",
"Non-RAID Disk" will be displayed under "Type/Status(Vol ID)" for the hard disk drives that made
up the RAID drive.
76
[ DELETE VOLUME MENU ]
Drives
Capacity
2
***GB
[ HELP ]
[ESC]-Previous Menu
[ DELETE VOLUME VERIFICATION ]
Status
Bootable
*****
Yes
[DEL]-Delete Volume
EPC-2020 Series User's manual
Advertisement
Table of Contents
