Acpi Settings - Contec PT-970 A Series Reference Manual

2. ACPI Settings

Configure the settings for ACPI power management.
ACPI Settings
Enable Hibernation
ACPI Sleep State
Wake On LAN Control on S5
Resume On RTC Alarm
ACPI Settings
Item
Enable Hibernation
ACPI Sleep State
Wake on LAN Control on S5
Resume on RTC Alarm
Resume On RTC Alarm (Only Available When "Enabled" Is Selected)
Item
RTC Wake up Day
RTC Wake up Hour
RTC Wake up Minute
RTC Wake up Second
—
BIOS Set up
PT-970 A/B Series Reference Manual
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Advanced
[Disabled]
[S3 (Suspend to RAM)]
[Disabled]
[Disabled]
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Options
Disabled / Enabled
Suspend Disabled /
S3 (Suspend to RAM)
Disabled / Enabled
Disabled / Enabled
Options
1-31
0-23
0-59
0-59
- 38 -
—
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Load Defaults for Win10
F4:Save & Exit
F5:Load Defaults for Win7
ESC:Exit
Description
Configure the Hibernation settings.
Configure the Sleep State settings.
Configure the Wake on LAN settings and
Resume on Ring function settings.
Enable or disable the function for
automatically turning on the system at the
specified date and time. When enabled, use
the following items to set the date and time
the system will automatically turn on.
Description
Set the day at which the system will
automatically turn on.
When this is set to "0," the system will turn on
each day.
Sets the time the system will automatically
turn on.
Sets the time the system will automatically
turn on.
Sets the time the system will automatically
turn on.