Create Raid Volume - Contec EPC-2020 Series User Manual

Create RAID Volume

You can use this menu to create the RAID drive. Set the RAID drive name, the RAID type, the contained
hard disk drives, and the capacity.
Choose the RAID level:
RAID 0: Stripes data (performance).
RAID 1: Mirror data (redundancy).
Recovery: Copies data between a master and a recovery disk.
RAID 10: Mirrors data and stripes the mirror.
RAID 5: Stripes data and parity.
[↑↓]Change
Item
Name Volume0
RAID Level RAID1(Mirror)
Disks Select Disks
Strip Size N/A
Capacity ***GB
Sync N/A
EPC-2020 Series User's manual
[ CREATE VOLUME MENU ]
Name: Volume0
RAID Level: RAID1(Mirror)
Disks: Select Disks
Strip Size: N/A
Capacity: ***GB
Sync: N/A
Create Volume
[ HELP ]
[TAB]-Next [ESC]-Previous Menu
Options
Set the name of the RAID drive.
Set the type of the RAID drive.
Only set this value to "RAID1(Mirror)".
Set the hard disk drives that make up the RAID drive.
Set the stripe size.
* This is not used with this product.
Set the capacity of the RAID drive.
Set the copying of data from the master drive to a recovery
drive and from a recovery drive to the master drive.
* This is not used with this product.
6. Software RAID setup
[ENTER]-Select
Description
73