Acpi Settings - Contec SPT-100A-22TP01 Reference Manual

1. ACPI Settings

Use this menu to configure the ACPI settings.
ACPI Settings
Enable Hibernation
ACPI Sleep State
Wake On LAN/RI Control on S5
Resume On RTC Alarm
ACPI Settings
Item
Enable Hibernation
ACPI Sleep State
Wake on LAN/RI Control on S5
Resume on RTC Alarm
Resume On RTC Alarm (only available when "Enabled" is selected)
Item
RTC Wake up Day
RTC Wake up Hour
RTC Wake up Minute
RTC Wake up Second
—
BIOS Setup
SPT-100A22TP01, SPT-100A22TP02 Reference Manual (Hardware)
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Advanced
[Enabled]
[S3 (Suspend to RAM)]
[Disabled]
[Disabled]
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Options
Disabled
Enabled
Suspend Disabled
S3 (Suspend to RAM)
Disabled
Enabled
Disabled
Enabled
Options
0 - 31
0 - 23
0 - 59
0 - 59
- 48 -
—
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Load Defaults for Win7
F4:Save & Exit
F5:Load Defaults for Win10
ESC:Exit
Description
Configure the Hibernation settings.
Configure the Sleep State settings.
Configure the Wake on LAN settings and
Resume on Ring function settings.
Enable or disable the function for
automatically turning on the system at the
specified date and time. When enabled, use
the following items to set the date and time
the system will automatically turn on.
Description
Sets the day the system will automatically
turn on.
Sets the time the system will automatically
turn on.
Sets the minute the system will automatically
turn on.
Sets the second the system will automatically
turn on.