Table of Contents
Advertisement
AT commands
Option Description
Append the DD (Digi Device Identifier) value to ND responses or API node identification
0x01
frames.
Local device sends ND or FN (Find Neighbors) response frame when the ND is issued.
0x02
Append the RSSI of the last hop to ND, FN, and responses or API node identification
0x04
frames.
Default
0x0
CI (Cluster ID)
XBee 868LP RF Module
The application layer cluster ID value. The device uses this value as the cluster ID for all data
transmissions. The default value 0x11 (Transparent data cluster ID).
Parameter range
0 - 0xFFFF
Default
0x11
DE (Destination Endpoint)
Sets or displays the application layer destination ID value. The value is used as the destination
endpoint for all data transmissions. The default value (0xE8) is the Digi data endpoint.
Parameter range
0 - 0xFF
Default
0xE8
SE (Source Endpoint)
Sets or displays the application layer source endpoint value. The value is used as the source endpoint
for all data transmissions. The default value (0xE8) is the Digi data endpoint.
Parameter range
0 - 0xFF
Default
0xE8
XBee 868LP RF Modules User Guide
Addressing commands
136
Advertisement
Table of Contents
