AT commands
P8 (DIO18/SPI_SCLK)
The DIO18/SPI_SCLK pin configuration (pin 14).
Parameter range
0, 1, 4, 5
Parameter
0
1
4
5
Default
1
P9 (SPI_ATTN)
The DIO19/SPI_ATTN pin configuration (pin 12).
Parameter range
0, 1, 4- 6
Parameter
0
1
4
5
6
Default
1
PD (Pull Up/Down Direction)
The resistor pull direction bit field (1 = pull-up, 0 = pull-down) for corresponding I/O lines that are set
by the PR command.
Parameter range
0x0 - 0xFFFFF (bit field)
Default
0x0
XBee 868LP RF Modules User Guide
Description
Disabled
SPI_SCLK
Digital output low
Digital output high
Description
Disabled
SPI_ATTN
Digital output low
Digital output high
UART data present indicator
I/O settings commands
150