Table of Contents
Advertisement
AT commands
Bits 6 and 7 cannot be set to DigiMesh on the 10k build.
n
Bits 4 and 5 must be set to 0.
n
Bits 1, 2, and 3 cannot be set on the 10k build.
n
Default
0x40 (10k product)
0xC0 (80k product)
NI (Node Identifier)
Stores the node identifier string for a device, which is a user-defined name or description of the
device. This can be up to 20 ASCII characters.
The command automatically ends when the maximum bytes for the string have been entered.
n
Use the ND (Network Discovery) command with this string as an argument to easily identify devices
on the network.
The DN command also uses this identifier.
Parameter range
A string of case-sensitive ASCII printable characters from 0 to 20 bytes in length. The string cannot
start with the space character. A carriage return or a comma automatically ends the command.
Default
One ASCII space character (0x20)
NT (Node Discover Timeout)
Sets the amount of time a base node waits for responses from other nodes when using the ND (Node
Discover) or DN (Discover Node) commands. The value randomizes the responses to alleviate network
congestion.
Parameter range
0x20 - 0x2EE0 (x 100 ms)
Default
0x82 (13 seconds)
NO (Node Discovery Options)
Set or read the network discovery options value for the ND (Network Discovery) command on a
particular device. The options bit field value changes the behavior of the ND command and what
optional values the local device returns when it receives an ND command or API Node Identification
Indicator (0x95) frame.
Parameter range
0x0 - 0x7 (bit field)
XBee 868LP RF Modules User Guide
Addressing commands
135
Advertisement
Table of Contents
