Setting Of One-Touch Operations; One-Touch Operations - JUKI SC-922 Engineer's Manual

12. SETTING OF ONE-TOUCH OPERATIONS

(1) One-touch operations

For SC-922, given functions can be added to settable items by means of the method described in "5.-(3) One-
touch setting".
1. Displayed contents and setting method
Activate the setting mode with reference to "5.-(4) Function setting" and select function No. 161.
When function No. 161 is selected, the following are displayed.
1 6 1 S
S E T
S E T 1 ∗ ∗ ∗ ∗
S E T 8 ∗ ∗ ∗ ∗
Example) When function setting No. 1 soft start function is added to the item of out-touch setting:
1 6 1 S
S E T
S E T
S E T 1
S
S E T 2
S E T
S E T
1 6 1 S
A
E T
Use the key
E n d
n U M
When "nUM" is selected, use the key
from SET1 to SET8 after "SET1" appears on the indicator
Use the key
(Refer to "12.-(2) One-touch settable item list" for settable parameters.)
1. Select function No. 12 for operation methods of function settings 1 to 3.
E T
n U M 2. Use the key
n o P 3. Use the key
1
4. Use the key
Alternately lights
o F T
n o P 5. Use the key
n u M
6. Use the key
E n d
7. Use the key
E T
8. Use the key
B
or to select "_End" or "_nUM" item.
or to enter the item number to be set.
to select the item of "_nUM".
to select "SET_".
to select the No. 1 soft start function.
to determine the setting above.
to end the setting of one-touch operations.
or to select the item of "_End".
or to return to function setting.
– 64 –
or to select a setting number A
.