JUKI SC-922 Engineer's Manual page 39

9 9 9 9 9
Sewing counting function (only CP-180) (Function setting No. 14)
This function count up every time thread trimming is completed and counts the number of completion of the
sewing process.
1 4
(Caution) The sewing counter can only be operative when the CP-180 is used with the sewing machine.
The counter indication changes as shown below according to the combination of setting No.6 and setting No.14.
Setting No. 6 Setting No. 14
1
1
0
0
0 0 0 0 0
Neutral automatic presser lifting function (with AK device only) (Function setting No.21 and No.155)
This function can automatically lift the presser foot when the pedal is in the neutral position.
The automatic lifting time depends on the No.47 Automatic presser foot lifter retaining time. In the case the
presser foot automatically comes down, the presser foot automatically goes up by bringing it to the neutral
position after it has moved away from that position (solenoid type only)
(Caution) This function is disabled when No. 93 Needle up/down switch additional function setting is
"2."
Function of automatic presser foot lifting at neutral position of pedal (function setting No. 21)
2 1
(Caution) The alternate function is carried out regardless of the setting of No. 155.
Setting of the position of carrying lout automatic presser foot lifting at neutral position of pedal (function setting
No. 155)
1 5 5
! ! ! ! !
Needle up/down switch function changeover function (Function setting No.22)
The needle up/down switch function can be changed over between the needle up/down compensation and one
stitch compensation.
2 2
@ @ @ @ @
Setting of the suction time of the back-tack solenoid (Function setting No.29)
This function can change the suction time of the back-tack solenoid.
It is effective to decrease the value when the heat is high.
(Caution) When the value is excessively decreased, failure of motion or defective pitch will follow.
Be careful when changing the value.
2 9 2 5 0
0 : off Sewing counting function is in operative.
1
1 : on Sewing counting function is operative. (Every time thread trimming is per-
formed)
2 : on External sewing counter switch input.
1 or 2 Bobbin counter
0 Bobbin counter
1 or 2 Sewing counter (only with CP-180)
0 Counter function is ineffective.
0 : Not provided with the function of automatic presser foot lifting at neutral po-
sition of pedal
1 : Provided with selectable function of automatic presser foot lifting at neutral
0
position of pedal
2 : Provided with the function of automatic presser foot lifting at neutral position
of pedal when enabled and added with the function of conducting alternate
operation by depressing the back part of pedal
0 : The function of automatic presser foot lifting at neutral position of pedal is
enabled at all times
0
1 : The automatic presser foot lifting at neutral position of pedal is only enabled
when the sewing machine stops with its needle down
0 : Needle up /down compensating stitching
0
1 : One stitch compensating stitching
Setting range : 50 to 500 ms <10 ms>
Counter
– 35 –