Flow Of Start & Entry - JUKI SC-922 Engineer's Manual

(2) Flow of start & entry
Activate the setting mode with reference to "5.-(4) Function setting" and select function No. 142.
When function No. 142 is selected, the following are displayed.
Program entry
(Command entry)
End of program entry
The program that was entered to "Pro1"
operates by turning off and on the power.
A
B
Use the key
The screen at left is the case of selecting program No. 1.
Press the key
Press the key
Press the key
5 6
Press the key or to select a command to be entered.
(Refer to "(3) Command entry" and "(4) Simplified program
command list" for command entry.)
5 6
Press the key or to select the "End" command.
Selection of this command allows program entry to end.
Press the key
Use the key
because the program cannot operates in the state of the
current display.
The operation of program 1 can be performed after "on" appears.
Use the key
– 55 –
5 6
or to select a program number.
3 4
or to move to the program setting mode.
5 6
or to select the program entry.
3 4
or to move to the program entry mode.
3 4
or to exit the entry mode.
5 6
or to move to the state of "on" display
3 4
or to exit the setting mode end the entry.