JUKI SC-922 Engineer's Manual page 76

In addition, there are the following error codes in this device. These error codes interlock (or limit function) and
inform the problem so that the problem is not enlarged when any problem is discovered. When you request our
service, please confirm the error codes.
(Caution) When
displayed.
When
[Checking procedure of the error code] CP-180
1) Turn ON the power switch with switch
2) The latest error number is displayed on indicator with blip.
3) Contents of previous errors can be checked by pressing switch
(When the procedure has reached the end, two alarm sounds in single tone will be head, "blip" "blip".)
4) When switch is pressed, duration of the generated history (in minutes) is displayed.
5) When switch is pressed, duration of sewing machine operation (in seconds) is displayed while the displayed
error is present after the occurrence of the previous error. However, the maximum value of display is 65535
(seconds).
A
B
switch is pressed, the previous error code of the currently displayed one is
switch is pressed, the next error code of the currently displayed one is displayed.
held pressed.
[Checking procedure of the error code] CP-18
1) Turn ON the power switch with
pressed.
2) The latest error number is displayed on indicator
with a blip.
3) Contents of previous errors can be checked by
pressing
(When the confirmation of the contents of previous
error advanced to the last, the warning sound peeps
in single tone two times.)
4) When switch
generated history (in minutes) is desplayed.
5) When switch
machine operation (in seconds) is displayed while the
displayed error is present after the occurrence of the
previous error. However, the maximum value of
display is 65535 (seconds).
.
– 72 –
switch
switch or switch
is pressed, duration of the
is pressed, duration of sewing
held
B
.