Operation Of The Connection Panel; Connecting Procedure Of Cp-18/180 - JUKI SC-922 Engineer's Manual

(3) Operation of the connection panel

1) Connecting procedure of CP-18/180

How to fix cable clip band
Panel
Pull
[Connection of the connector for CP panel]
Exclusive connectors are prepared for connection of the
connector for CP-18/180.
Paying attention to the orientation of the connector
connect it to connector
board. After connecting, securely lock the connector.
(Caution) Be sure to turn OFF the power before
connecting the connector.
1. After inserting the connector, put all cords together
with cable clip band
(Caution) 1. Fix the cord clamp and the cable clip
band
dure. (Refer to Instruction Manual)
2. When removing the connector, remove
it from the cable clip band while press-
ing the hook of the cable clip band
How to remove cable clip band
Panel
Push the hook.
Pushing the hook portion, push the band to remove it.
– 6 –
(CN38) located on the circuit
located on the side of the box.
following the attaching proce-
Push
.