Rectangular Stitching Pattern - JUKI SC-922 Engineer's Manual

4) Rectangular stitching pattern

Sewing pattern
C
1. Press rectangular stitching pattern switch
2. The rectangular stitching pattern is selected. Now, the predetermined number of stitches and other sewing data
are shown on the control panel.
3. To change the number of stitches of the processes in the rectangular stitching pattern, operate switches
processes C and D) to change the number of stitches for processes C and D.
Select the reverse feed stitching accordingly. To change the number of reverse-feed stitches, operate switches
for setting the number of stitches for processes A and B.
(Adjustable range : A, B = 0 to 19 stitches, C, D = 0 to 99 stitches)
4. Four different kinds of stitching patterns can be performed according to the combination of ON/OFF settings of
automatic reverse stitching (for start) switch
5. Furthermore, the double reverse stitching mode can be specified by operating double reverse stitching (for start)
switch and double reverse stitching (for end) switch
When the touchback switch is operated at this time, the sewing machine runs at a low speed (compensating
stitching). In the final step, sewing can be continued regardless of the setting of the number of switches when the
pedal is returned to its neutral position and its front part is depressed again.
6. If automatic thread trimming switch
after the completion of the last process. (If the automatic reverse stitching (for end) is selected, the sewing machine
will automatically perform thread trimming after it finishes the automatic reverse stitching (for end).)
7. If thread trimming prohibiting function
thread trimming.
8. If one-shot automatic stitching function
until the number of stitches specified is reached, at the predetermined sewing speed by depressing the pedal
while the sewing machine is engaged in the sewing of process C or D. The machine performs thread trimming in
the last process of one-shot automatic stitching pattern.
9. For the sewing machine equipped with an auto-lifter, the presser foot will automatically go up after the completion
of each sewing process.
OFF
A
D
B
C
C
D
OFF OFF
on the control panel to select the rectangular stitching pattern.
and automatic reverse stitching (for end) switch
is turned ON, the sewing machine will automatically perform thread trimming
is chosen, the machine will stop with the needle up without performing
is chosen, the machine will automatically perform sewing at a stretch
ON OFF
A
D
C
C
D
ON
.
– 10 –
ON
A
B
A
D
B
C
C
D
ON
B
D
C
D
(for
.