JUKI SC-922 Engineer's Manual page 30

(Start level ; U : User's mode, S : Service mode)
No. Item
87 Function of Pedal curve is selected. (Improving pedal inching
pedal curve operation)
selection
Number of rotations
90 Initial motion up Automatic UP stop function is set immediately after
stop function turning ON the power.
0 : off
1 : on
91 Function of Function of compensating stitching when turning
prohibiting handwheel by hand at the time of completion of
compensation constant-dimension stitching
operation after 0 : Function of compensating stitching is effective.
turning 1 : Function of compensating stitching is prohibited.
handwheel by
hand
92 Function of Function to reduce speed at the time of completion
reducing speed of reverse feed stitching at the start of sewing.
stitching at the 0 : Speed is not reduced.
start of sewing 1 : Speed is reduced.
93 Function added Operation of needle up/down compensating switch is
to needle up/ changed after turning ON the power of thread trimming.
down compen- 0 : Normal (needle up/down compensating stitching
sating switch
1 : One stitch compensating stitching is performed
2 : Needle-down function activated after thread
3 : Besides the operation 2, addition of needle-up
94 Continuous + The function that does not stop the sewing machine
One-shot by combining continuous stitching with one-shot
nonstop function stitching using the program sewing function which is
available in the IP operation panel.
0 : Normal (The sewing machine stops when a
1 : The sewing machine does not stop when a
95 Function of The machine head to be used is selected.
machine head * When the machine head is changed. each setting
selection item is modified into initial values for the machine
head.
96 Max. number of Max number of rotation of the sewing machine head
rotation setting can be set.
(The MAX value differs by machine head.)
102 Function of Sew patterns such as the backstitch and set a function.
pattern stitching 0 : The operation of the pattern selection is effective.
1 : The operation of the pattern selection is invalid.
103 Needle cooler Delay time from the stop of sewing machine to the
output OFF output OFF is specified using the needle cooler
delay time output function.
104 Input / output Display function of input/output data is set.
Test display 0 : Normal movement
1 : Display the state of the input/output after the
∗
Do not change the set values with asterisk (
of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
Description
2
0
only)
only when aforementioned changeover is made.
(Upper stop → upper stop)
trimming
function activated by lowering the presser bar
and needle-up function activated by trimming
the thread
step is completed.)
step is completed and proceeds to next step.
next power supply injection.
∗
) mark as they are functions for maintenance. If the standard set value set at the time
Setting range Setting level
0/1/2
1
Pedal stroke
0/1
0/1
0/1
0 to 3
0/1
150 to MAX
(sti/min)
0/1
100 to 2000
(ms)
0/1
– 26 –
Indication of
function setting
U
8 7
U
9 0
U
9 1
U
9 2
U
9 3
U
9 4
U
9 5
L U 5
U
9 6
3 0 0
S
1 0 2
U
1 0 3 5 0
S
1 0 4
Ref.
page
39
0
39
0
1
39
0
40
0
40
0
1
40
0
0
0
0