Adjusting The Needle Entry Position (In Terms Of Needle Rocking Direction); Adjusting The Needle Entry Position (In Terms Of Longitudinal Direction); Adjusting The Longitudinal Play At The Needle Bar - JUKI IP-100A Engineer's Manual

(7) Adjusting the needle entry position (In terms of needle rocking direction)

1

(8) Adjusting the needle entry position (In terms of longitudinal direction)

(9) Adjusting the longitudinal play at the needle bar

As observed from
the face plate side
1
Standard Adjustment
2
Standard Adjustment
Hole for adjusting
needle entry position
Standard Adjustment
It is not necessary to remove the face plate.
2
3
Needle bar support
base guide shaft
20
−
Needle bar support base shaft
connecting stud
3
Needle enters the
center of needle slot.
For an
excessive play
Engraved
marker dot
Needle bar
−
For an
excessive play