Interface Specifications; Interface Types - SATO CW408 Operator's Manual

Preliminary

INTERFACE SPECIFICATIONS

This section presents the interface types and their specifications for the CW408 printer. These specifications
include detailed information to assist in the selection of the most appropriate method for the printer to
interface with the host.
This section presents the following information:
•

7.1 Interface Types

• 7.2 Universal Serial Bus (USB) Interface
• 7.3 Local Area Network (LAN) Ethernet
7.1 INTERFACE TYPES
CW408 printer is equipped with a multiple interfaces board to perform data communication with the host.
The following built-in interfaces are available.
1) USB interface (USB2.0 High-speed, B type connector)
2) LAN interface (10BASE-T/100BASE-TX automatic switch over, RJ45 connector)
Caution
Never connect or disconnect interface cables (or use a switch box) with power applied to either
the host or printer. This may caused damage to the interface circuitry in the printer/ host and is not
covered by warranty.
CW408 Operator Manual
Section 7: Interface Specifications
Page 7-1