Base Reference Point Adjustment; Adjustment Of Base Reference Point For Printing (Print Position) - SATO CW408 Operator's Manual

Preliminary

8.4 BASE REFERENCE POINT ADJUSTMENT

8.4.1 Adjustment of Base Reference Point for Printing (Print Position)

Adjustment Location
Adjustment mode: Pitch position
Print position is adjustable within the range of +3.75 mm to -3.75 mm (+0.15" to -0.15") using the adjustment
LCD setting described above. The shift experienced by the media or print layout can be offset with the
adjustment of the pitch position.
Adjustment for
Adjustment for
Note:
The above base reference point for printing is the stop position when sensor type is set to Gap sensor.
CW408 Operator Manual
Media feed direction
"+" value
No
Adjustment
"-" value
+3.75 mm (+0.15")
Adjustment Range
+3.75 mm to -3.75 mm
(+0.15" to -0.15")
Base reference
point for printing
(Print head)
43.91 mm (1.73")
-3.75 mm (-0.15")
Section 8: Appendix
Gap
Page 8-5