Parts Identification - SATO CW408 Operator's Manual

Preliminary

1.3 PARTS IDENTIFICATION

Front View
1
2
3
4
1 Operator panel
It consists of three contact buttons, two LED
indicators (green and red) and an OLED
display.
Top cover
2
Open this cover to access the media path of
printer.
Media discharge outlet
3
Opening for media output.
Cover open latch
4
Press this latch on the right side of the printer
to open the Top cover of the printer.
Power button
5
Press this button to set the power to on or off.
Display panel
6
The OLED display indicates the current status
of the printer.
CW408 Operator Manual
ONLINE indicator
7
The LED lights green when the printer is online
and blinks green when the printer is offline.
ERROR indicator
8
The LED lights or blinks red when an error is
detected by the printer.
FEED button
9
Press this button in offline mode to feed a
piece of media.
When printer is in various mode settings:
Press this button to confirm the selected item
or value.
LINE button
10
Press this button to select the printer status
(online/ offline) or to start/ pause a print job.
When printer is in various mode settings:
Press this button to select the item or change
the value.
Section 1: Introduction
5
6
7
8
9
10
Page 1-3