Font Settings Mode - SATO CW408 Operator's Manual

Preliminary

3.8 FONT SETTINGS MODE

The following settings are available in the Font settings mode.
1. In BASIC SETTINGS menu, press the LINE button repeatedly to display FONT SETTINGS on the screen.
Press the FEED button to confirm the selection.
2. The FONT SETTINGS menu is displayed. Press the FEED button to switch to the next setting options as
shown above. To return to the previous setting option, press the LINE and FEED buttons simultaneously.
To return to the BASIC SETTINGS screen, press and hold the LINE and FEED buttons simultaneously for
more than three seconds.
3. When the desired setting option is displayed, press the LINE button to select an item. Then press the
FEED button to save the setting and move to the next screen.
Do a test print after completing the adjustments to make sure that the settings are correct. Refer to Section
3.14 Test Print Mode for details.
Menu
FONT SETTINGS
ZERO SLASH
ENABLE DISABLE
FONT SETTINGS
CHARACTER PITCH
ENABLE DISABLE
CW408 Operator Manual
BASIC SETTINGS
FONT SETTINGS
SKIP
LINE + FEED
button
FONT SETTINGS
LINE + FEED button
for more than 3 secs
ZERO SLASH
ENABLE
LINE + FEED
button
FONT SETTINGS
LINE + FEED button
for more than 3 secs
CHARACTER PITCH
ENABLE
FONT SETTINGS
Determine whether zeroes are printed with a slash across them or not. The
zero slash can be set to either 0 or Ø.
ENABLE: [0] will be accompanied by a slash.
DISABLE: No slash will appear.
The initial setting is ENABLE.
* Zero slash (zero has a slash through it) is available in the following fonts:
XU, XS, XM, XB, XL, Outline font
Determine whether the space surrounding each text character is of a fixed
width, or whether that space is to be varied to be visually more pleasant and
proportional.
ENABLE: Data will be printed with proportional pitch font.
DISABLE: Data will be printed with fixed pitch character fonts.
The initial setting is ENABLE.
Available fonts: XU, XS, XM, XB, XL
Section 3: Operation and Configuration
* Press the LINE button to select an item.
* Press the FEED button to save the setting and
SELECT
move to the next screen.
FEED
* Press and hold the LINE and FEED buttons
button
simultaneously for more than three seconds to
revert to the BASIC SETTINGS menu.
DISABLE
FEED
button
DISABLE
FEED
button
Description
Page 3-15