Local Area Network (Lan) Ethernet; Basic Specifications - SATO CW408 Operator's Manual

Preliminary

7.3 LOCAL AREA NETWORK (LAN) ETHERNET

7.3.1 Basic Specifications

Interface Connector
Protocol
Link/Status LED
CW408 Operator Manual
LED2
Connector type: RJ45
Cable type: 10BASE-T, 100BASE-TX (Category 5 and upper)
Cable length: 100 m (328 feet) or less
Status 3, Status 4
Status LED1 lights up when establishing the LINK with Ethernet device or when
receiving the packets.
LED
LED1
LED2
Color
Green Lights up for 10 ms when receiving packets
Lights off when recognizing the connection
to 10BASE-T
Lights up when recognizing the connection
Orange
to 100BASE-TX
Lights up when LAN interface cable is not
connected.
Section 7: Interface Specifications
LED1
Conditions
Page 7-3