Preparations For Using The Usb Connection Of The Pg/Pc - Siemens SINAMICS G120 Manual

3 Setup and Commissioning
3.7 Downloading the SINAMICS configuration
3.7.2

Preparations for using the USB connection of the PG/PC

Table 3-5
No. Action
1. Connect the SINAMICS G with the
PG/PC using a USB cable.
Wait until Windows has
recognized the SINAMICS G (USB
Mass Storage Device).
2.
Click on the SINAMICS G.
Depending on the project
used, it is called
– G110M_DP
– G120_CU240E_2_DP_F
– G120_CU240E_2_DP
– G120_CU250S_2_V_DP
– G120C_DP
– G120_CU240D_2_DP_F
– G120_CU240D_2_DP
Double-click on
"Commissioning"
This opens STARTER with
the project.
3. Open "Set PG/PC interface".
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2, 11/2014
Remarks
25