Siemens SINAMICS G120 Manual page 72

6 Configuration and Settings
6.1 Configuring the SIMATIC S7-300/400F controller
No. Action
12.
Note the "F_Dest_Add" in
Hex.
You will need this value
when configuring the
SINAMICS safety functions
(step 20 in Tabelle 6-2).
Click the OK button to close
the F-Parameter dialogue
Click the OK button to close
the "DP slave properties"
13. Enter a DI or DI/DO module (e.g.
6ES323-1BH01-0AA0) on slot 4
of the central rack.
Please ensure that the I-address
is 0.
14. Please enter an F-DO module on
slot 5 of the central rack (e.g.
6ES323-1BH00-0AA0).
Make sure that the I/Q-address
is set to1.
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2, 11/2014
Remarks
72