Solution; Overview Of The General Solution - Siemens SINAMICS G120 Manual

2 Solution

2.1 Overview of the general solution

2 Solution
This application example gives an example of how to connect a SINAMICS
G110M, G120, G120C or G120D to a SIMATIC S7-300F. It uses blocks which can
be directly applied to your own application.
2.1 Overview of the general solution
Schematic layout
The following figure gives a schematic overview of the most important components
of the solution:
Figure 2-1
SINAMICS G120
The example shows you how ...
...the SIMATIC S7-300/400F controller is configured.
...the communication is programmed in the SIMATIC S7-300/400F controller.
...the SINAMICS G is configured using STARTER.
... the basic and extended safety functions of SINAMICS G are addressed
by the SIMATIC S7-300/400F CPU.
(Extended Safety Functions not with SINAMICS G110M, G120C,
G120 with CU240E-2 DP or SINAMICS G120D with CU240D-2 DP)
... the three safety-related inputs of the SINAMICS are used as F-DI in the
SIMATIC S7-300/400F CPU.
NOTICE This example is only valid for frequency converters SINAMICS G110M with
FW4.7 and SINAMICS G120, G120C and G120D as of FW4.6.
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2,
S7-300/400F
PROFIBUS
with PROFIsafe
Motor
11/2014
KTP 600
PROFINET
USB
(alternative to configuration
via fieldbus)
PC/PG
6