Siemens SINAMICS G120 Manual page 12

2 Solution
2.3 Hardware and software components used
Sample files and projects
The following list includes all files and projects used in this example.
Table 2-8
60441457_SINAMICS_G110M_at_S7-300400F-DP_CODE_v22.zip
60441457_SINAMICS_G120_E_at_S7-300400F-DP_CODE_vnn.zip
60441457_SINAMICS_G120_EF_at_S7-300400F-DP_CODE_vnn.zip
60441457_SINAMICS_G120_S_at_S7-300400F-DP_CODE_vnn.zip
60441457_SINAMICS_G120C_at_S7-300400F-DP_CODE_vnn.zip
60441457_SINAMICS_G120D_at_S7-300400F-DP_CODE_vnn.zip
60441457_SINAMICS_G120D_F_at_S7-300400F-DP_CODE_vnn.zip
60441457_SINAMICS_G120_at_S7-300400F-DP_SHORT-DOKU_v22_en.pdf
60441457_SINAMICS_G120_at_S7-300400F-DP_DOKU_v22_en.pdf
The STARTER example project has been designed for usage with the
CAUTION
example components listed in
and/or motor can be damaged or destroyed if a SINAMICS G120 with a
different output or a different motor is connected, without adjusting the
respective parameters.
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2,
Component
The password for the safety settings is "siemens".
1
nn = 21: Für SINAMICS G120 mit FW 4.6
1
nn = 22: Für SINAMICS G120 mit FW 4.7
11/2014
1
1
1
1
1
1
Table 2-1 to Table 2-5. the SINAMICS G120
Note
STEP 7 project for
SINAMICS G110M
STEP 7 project for
SINAMICS G120 with
CU 240E-2 xx
STEP 7 project for
SINAMICS G120 with
CU 240E-2 xx F
STEP 7 project for
SINAMICS G120 with
CU 250S-2 xx
STEP 7 project for
SINAMICS G120C.
STEP 7 project for
SINAMICS G120D
with CU 240D-2 xx
STEP 7 project for
SINAMICS G120D
with CU 240D-2 xx F
Short documentation
for experienced users
This document
12