Siemens SINAMICS G120 Manual page 23

3 Setup and Commissioning
3.7 Downloading the SINAMICS configuration
No. Action
6. Confirm that the assignment was
changed.
7. Make sure that the yellow arrow
is now displayed in "PG/PC(1)":
8. Use a PROFIBUS cable to
connect the SINAMICS G to the
SIMATIC S7 CPU and a network
cable to connect the SIMATIC
S7 CPU to the PG/PC.
9.
Click on the SINAMICS G.
Depending on the project
used, it is called...
– G110M_DP
– G10_CU240E_2_DP_F
– G120_CU240E_2_DP
– G120_CU250S_2_V_DP
– G120C_DP
– G120_CU240D_2_DP_F
– G120_CU240D_2_DP
Double-click on
"Commissioning"
This opens STARTER with
the project.
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2, 11/2014
Remark
23