3 Setup and Commissioning
3.2 Setting the PROFIsafe address
3.2
Setting the PROFIsafe address
For the F-DI module, the PROFIsafe address must be set with the DIP switches on
the rear. For this example project, set switches 0, 1, 2, 6 and 7 on the rear of the
F-DI module to ON.
Figure 3-3
3.3
IP addresses and PN names
The following IP addresses and device names are used in the example:
Table 3-1
IP
192.168.0.1
192.168.0.3
192.168.0.200
The network mask is always 255.255.255.0 and no router is used.
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457,
V2.2,
Component
S7-300/400F CPU
KPT600
PG/PC
11/2014
Device Name
s7-cpu
ktp600
-
15