Siemens SINAMICS G120 Manual page 20

3 Setup and Commissioning
3.6 Downloading the SIMATIC program
No. Action
10. Click on "Edit safety program"
Answer any query for the safety
password by entering "siemens".
11. Click the "Download" button in
the "Safety Program" dialog.
When asked if the standard
blocks shall be downloaded
as well, respond with "YES".
Enable stopping the CPU for
a consistent download.
Let the CPU go back to
RUN mode.
Close the "Safety Program"
dialog.
12. Restart the CPU after
downloading.
13. If you wish to use the panel,
assign IP address 192.168.0.3
and device name "ktp600" to it.
Afterwards load the project work
into the panel.
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457, V2.2,
Assign IP address and device name directly in the
PROFINET Settings of the HMI's Control Panel .
11/2014
Screenshots / Remarks
20