3 Setup and Commissioning
3.7 Downloading the SINAMICS configuration
No.
Action
6.
Select "DEVICE (S7USB)" and
click "OK".
7.
Proceed with the instructions in
chapter 3.7.3.
3.7.3
Downloading the configuration into the SINAMICS G
Table 3-6
No.
Action
1.
Go online.
2.
If the "Target Device Selection"
window opens,
set the checkmark at
SINAMICS G,
select the desired access
point (S7Online for the
network interfaced (routed to
PROFIBUS by the SIMATIC
S7-CPU) and DEVICE for the
USB interface) and
click on "OK".
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457,
V2.2,
The picture shows the example of a SINAMICS G120 with
CU 240E-2 DP-F.
11/2014
Remarks
Remarks
27