3 Setup and Commissioning
3.7 Downloading the SINAMICS configuration
No.
Action
3.
If the "Online/offline comparison"
window opens, click on "Load HW
Configuration to PG"
Should you receive a note which
indicates different parameters for
the power unit, you need to make
your own configuration. Follow the
instructions in chapter
the SINAMICS G120
especially steps
11
4.
Start the download and tick "After
loading, copy RAM to ROM".
5.
In the tree you open
"Functions > Safety
Integrated"
Depending on the used
SINAMICS G or the used CU,
the available settings options
vary.
First you click on "Change
settings" and then on
"Activate settings" (button
name changes).
SINAMICS G120C at S7-300/400F-DP
Beitrags-ID: 60441457,
V2.2,
"Configuring
drive",
and
12
Screenshot of CU240E-2 DP-F
A screenshot of SINAMICS G120C is on the next page.
11/2014
Remarks
28