Flash & Video Lighting Sets; Lens Accessories - Fantasea Line FG7X III VACUUM Instruction Manual

Plate by inserting it inside the dedicated slot on the housing and pushing it all the way in.
6. When installed on the housing, the Fiber Optic Cable Plate blocks the internal camera flash, so only
the external slave flash illuminates the subject. This diminishes the effects of backscatter, as well as
eliminates any shadowing effect caused by housing lens port, especially when lens accessories are
mounted on the housing.
7. Follow the instructions in your strobe manual on how to synchronize your camera with the external
strobe and to select the proper pre-flash program for your camera. It is recommended to test the
synchronization when photographing opposite a mirror. In this case, the output of both the built-in
camera flash and the strobe should be visible in the test shot taken.
FLASH & VIDEO LIGHTING SETS
A variety of Fantasea flash and video lighting sets are available for the FG7X III VACUUM Housing, enabling
you to further enhance your images and videos. These sets include trays, Flex arms, slave flashes, powerful
and sturdy yet stylish video lights, fiber optic cables, focus lights, padded bags and more.

LENS ACCESSORIES

The FG7X III VACUUM Housing lens port features a 67mm thread, which can accommodate all 67mm
conversion lenses and color correction filters, such as:
 Optical Wide Angle Wet Lenses: Wide angle lenses allowing for high quality wide angle images up to
14mm.
 BigEye Wide Angle Lenses: Perfect for shooting seascape, divers, ship wrecks and schools of fish,
without moving further away from the subject, thereby still taking full advantage of water clarity
and artificial light sources.
 SharpEye Macro Lenses: Perfect for shooting close-up images of fish, corals, textures and more.
These macro lenses magnify the subject and enable the camera to focus on short distances for
creating super sharp images.
 RedEye & PinkEye Color Correction Filters: Used to restore the colors absorbed by the water. In
shallow depths, these filters can serve as an attractive alternative to artificial light sources. These
filters can be mounted directly on the housing lens port, and can also be installed inside BigEye and
SharpEye accessory lenses.

EyeGrabber Lens Holders: Attach to Flex or Ball & Joint arms, enabling safe, secure and easily
accessible storage for your lens accessories when not in use during the dive.
FG7X III VACUUM Housing Instruction Manual 20191222
32