Advertisement
Quick Links
This manual contains text, diagrams and explanations which will guide the reader in the correct installation
and operation of the FX
understood before attempting to install or use the unit. Further information can be found in the FX series
PLC hardware manuals.
Note's on the symbology used in this manual
At various times through out this manual certain symbols will be used to highlight points of information
which are intended to ensure the user's personal safety and protect the integrity of the equipment.
Whenever any of the following symbols are encountered, its associated note must be read and
understood. Each of the symbols used will now be listed with a brief description of its meaning.
Hardware warnings
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property damage.
1. INTRODUCTION
1.1 Associated Manuals
Manual name
★FX
-16CCL-M
2N
User's Manual
★FX
/FX
/FX
/FX
1S
1N
2N
Programming Manual II
★FX
/FX
/FX
3G
3U
3UC
Programming Manual
✩FX
Hardware Manual
1N
✩FX
Hardware Manual
2N
✩FX
Hardware Manual
3G
✩FX
Series User's
3G
Manual
- Hardware Edition
✩FX
Hardware Manual
3U
✩FX
Series User's
3U
Manual
- Hardware Edition
✩FX
(DSS/S) Hardware
2NC
Manual
✩FX
(D/UL)
2NC
Hardware Manual
✩FX
(D,DSS)
3U
Hardware Manual
✩FX
Series User's
3UC
Manual
- Hardware Edition
✩FX
-32CCL
2N
User's Manual
★: Indispensable manual
✩: Manual required depending on equipment used
FX
-16CCL-M CC-Link SYSTEM MASTER BLOCK. It should be read and
2N
Manual number
JY992D93101
(sent separately)
JY992D88101
2NC
(sent separately)
JY997D16601
(sent separately)
JY992D89301
(packed with product)
JY992D66301
(packed with product)
JY992D33401
(packed with product)
JY997D31301
(sent separately)
JY997D18801
(packed with product)
JY997D16501
(sent separately)
JY992D76401
(packed with product)
JY997D87201
(packed with product)
JY992D28601
(packed with product)
JY997D28701
(sent separately)
JY992D71801
(packed with product)
-16CCL-M CC-Link SYSTEM MASTER BLOCK
2N
HARDWARE MANUAL
Describes programming and handling of the CC-
Link master block FX
Explains the instructions available to the FX
FX
/FX
/FX
1N
2N
Explains the instructions available to the FX
FX
/FX
3U
3UC
Describes hardware specifications, wiring and
mounting of the FX
Describes the contents related to the hardware
such as specifications, wiring and mounting of the
FX
Series PLC.
2N
Describes the name of each part and harding of
the FX
Series PLC.
3G
Describes the contents related to the hardware
such as specifications, wiring and mounting of the
FX
Series PLC.
3G
Describes the name of each part and harding of
the FX
Series PLC.
3U
Describes the hardware specifications, wiring and
mounting of the FX
Describes the hardware specifications, wiring and
mounting of the FX
Describes the contents related to the hardware
such as specifications, wiring and mounting of the
FX
Series PLC.
2NC
Describes the name of each part and harding of
the FX
Series PLC.
3U
Describes the hardware specifications, wiring and
mounting of the FX
Describes programming and handling of the CC-
Link interface block FX
JY992D93201D
Description
-16CCL-M.
2N
Series PLC.
2NC
Series PLC.
Series PLC.
1N
Series PLC.
3U
Series PLC.
2NC
Series PLC.
3UC
-32CCL.
2N
CC-Link Ver.1.10
/
1S
/
3G
Advertisement
Related Manuals for Mitsubishi FX2N-16CCL-M
Summary of Contents for Mitsubishi FX2N-16CCL-M
- Page 1 CC-Link Ver.1.10 -16CCL-M CC-Link SYSTEM MASTER BLOCK HARDWARE MANUAL JY992D93201D This manual contains text, diagrams and explanations which will guide the reader in the correct installation and operation of the FX -16CCL-M CC-Link SYSTEM MASTER BLOCK. It should be read and understood before attempting to install or use the unit.
- Page 2 1.2 Overview The CC-Link master block FX -16CCL-M is a special extension block which assigns an FX Series PLC as the master station of the CC-Link system. 1) Remote I/O stations and remote device stations can be connected to the master station (FX Series PLC).
- Page 3 Number Name Description ON : Switch setting error has occurred. indicators 2 ON : The master station is already present in the same line. PRM ON : Parameter setting error has occurred. ON : Data link watchdog timer errors has TIME TIME occurred (error in all stations).
-
Page 4: Installation And Wiring
2. Installation and wiring INSTALLATION PRECAUTIONS • Use the module in the environment described in the USER’S MANUAL General Specification. Do not use the PLC in places with dust, soot, conductive dust, corrosive gas or combustible gas, places exposed to high temperature, condensation, wind or rain or places that experience vibration or impact. -
Page 5: General Specification
Important Make sure to use only one type of cable (dedicated CC-Link cables OR dedicated CC-Link high- performance cables). If both types of cables are used together, normal data transmission cannot be guaranteed. Point The shielded dedicated CC-Link cable should go through the terminals SLD and FG in each module, and both ends should be grounded (Class D = solid grounding). - Page 6 Warranty Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi; opportunity loss or lost profits caused by faults in the Mitsubishi products; damage, secondary damage, accident compensation caused by special factors unpredictable by Mitsubishi;...
- Page 7 1.2 Overview Number Name Description ON : Switch setting error has occurred. The CC-Link master block FX -16CCL-M is a special extension block which assigns an FX Series PLC indicators 2 as the master station of the CC-Link system. ON : The master station is already present in the same line.
- Page 8 (allowed) (not allowed) Mitsubishi will not be held liable for damage caused by factors found not to be the cause of "Maximum number of I/O points per system" below shall be satisfied. Mitsubishi; opportunity loss or lost profits caused by faults in the Mitsubishi products; damage, •...