Mitsubishi FX3U-232-BD User Manual page 654

FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
7.2.2 For FXGP/WIN
This subsection explains the line connection procedure using FXGP/WIN. Prepare for connection of the PLC,
connect a modem to the communication port in the personal computer, and then start up FXGP/WIN.
1
Setting the modem to be used
Select [Remote] - [Environment] - [Modem] from the toolbar to display the following dialog box.
Select the modem to be used, and click the [OK] button.
If the modem to be used is not displayed, click the [New Entry] button, and register the AT
command for the modem.
2
Connecting the connection destination
Select [Remote] - [Connect] - [to PLC] from the toolbar to display the following dialog box.
Select the connection destination, and click the [OK] button.
If the connection destination is not displayed, click the [New Entry] button, and register the
connection destination.
When directly setting a telephone number, click the [Manual] button.
I-44
→ For details on AT command registration, refer to Subsection 6.2.1.
→ For details on connection destination registration, refer to Subsection 6.2.2.
7 Connecting Line
7.2 Line Connection Procedure
→ Proceed to step 4.
→ Proceed to the next step.