Mitsubishi FX3U-232-BD User Manual page 634

FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
3
Displaying the device list
Input the head number of devices used to set the AT command to "Device Label," and click the
[Display] button.
The device (data register) number to be set varies depending on the FX Series as shown below:
FX Series
FX /FX PLC
3U 3UC
FX /FX PLC
2N 2NC
FX /FX PLC
1N 1NC
FX PLC
1S
4
Inputting the AT command
Input the AT command to D1000 (D200 For FX
Double-click the data register to be input to display the "Character string input" dialog box.
Input one (half-width) character, and click the [OK] button.
I-24
Device range
D1000 to D1059
D1000 to D1059
D1000 to D1059
D200 to D255
PLC) and later. Input one character to one word.
1S
5 How to Setup Modems on the PLC Side
5.1 Setting Using GX Developer