Mitsubishi FX3U-232-BD User Manual page 306

FX Series PLC User's Manual - Data Communication Edition
Inverter Communication
4.2 Selecting Cables and Connection Devices
When connecting equipment operating in accordance with RS-485, use the following connection method with
10BASE-T or shielded twisted pair cables.
PU connector
(RJ45 connector)
4.2.1 S500, E500, A500, F500, V500 and E700 Series (PU connector)
1. In the case of 1-to-1 connection
When a distributor is not used
10BASE-T cable
Terminal resistor
Use a distributor because a terminal resistor cannot
be connected to the inverter.
2. In the case of 1-to-N connection
When a distributor is used
10BASE-T cable
Terminal resistor
E-16
Non-stranded cable
(10BASE-T cable for LAN)
RS-485 connector
(PU connector)
Distributor
10BASE-T cable
RS-485 connector
Terminal resistor
(which is supplied with communication equipment for the
FX PLC side, and should be arranged by the user for the
inverter side)
When a distributor is used
10BASE-T cable
Terminal resistor
RS-485 connector
(PU connector)
10BASE-T
cable
Distributor
10BASE-T cable
PU
connector
4.2 Selecting Cables and Connection Devices
Distributor
10BASE-T cable
Terminal
10BASE-T
cable
Distributor
10BASE-T cable
PU
connector
4 Wiring
Terminal
resistor
resistor