Mitsubishi FX3U-232-BD User Manual page 575

FX Series PLC User's Manual - Data Communication Edition
Programming Communication
1.3 Communication Type Applicability in PLC
1.3.1 Applicable versions
The communication types are applicable in the following versions.
PLC
FX (D, DSS)
3UC
Series
FX -32MT-
3UC
LT
FX Series
3U
FX Series
2NC
FX Series
2N
FX Series
1NC
FX Series
1N
FX Series
1S
FX Series
0N
FX Series
0S
FX Series
0
FX Series
2C
FX (FX) Series
2
FX Series
1
*1. When using USB communication with a model that does not support USB communication equipment
(-BD), use the FX-USB-AW.
However, FX
1.3.2 Products whose production was stopped
The table below shows FX series whose production (main unit, communication equipment, etc.) was stopped.
Use the description on system configuration, etc. in this manual for maintenance.
PLC
FX Series
0
FX Series
2C
FX (FX) Series
2
FX Series
1
: Applicable (If applicable versions are limited, they are described inside ( ).)
—: Not applicable
Optional
Standard communication
built-in port equipment
in operating in
accordance accordance
with RS-422 with RS-422
(-BD)
—
—
—
—
—
—
—
—
—
(FX), FX and FX PLCs do not support the FX-USB-AW.
2 2C 1
Date when production was stopped
June 30, 2002
1.3 Communication Type Applicability in PLC
Optional
Optional
communication
communication
equipment
equipment
operating in operating in
accordance
accordance
with RS-232C
with USB
*1
(-BD)
(-BD) (ADP)
— —
— —
—
— —
—
—
— —
— — —
— — —
— —
— —
— — —
Maintenance is offered within 7 years from the
end of production (until June 30, 2009).
1 Outline
Remarks
Programming communication
is provided in all of the stan-
dard built-in port and optional
communication equipment
operating in accordance with
RS-422/RS-232C/USB.
Programming communication
is provided in all of the stan-
dard built-in port, but is not
provided in any optional com-
munication equipment operat-
ing in accordance with RS-
422/RS-232C/USB.
Remarks
H-5
A
B
C
D
E
F
G
H
I
Apx.