Mitsubishi FX3U-232-BD User Manual page 155

FX Series PLC User's Manual - Data Communication Edition
Parallel Link
1.3 Communication Type Applicability in PLC
1.3.1 Applicable versions
The communication types are applicable in the following versions.
PLC
FX Series
3UC
FX Series
3U
FX Series
2NC
FX Series
2N
FX Series
1NC
FX Series
1N
FX Series
1S
FX Series
0N
FX Series
0S
FX Series
0
FX Series
2C
FX (FX) Series
2
FX Series
1
1. Version check
The D8001(decimal) special data register contains information for determining the PLC version.
D8001
PLC type and
version
1.3.2 Products whose production was stopped
The table below shows FX series whose production (main unit, communication equipment, etc.) was stopped.
Use the description on system configuration, etc. in this manual for maintenance.
PLC
FX Series
0
FX Series
2C
FX (FX) Series
2
FX Series
1
: Applicable (If applicable versions are limited, they are described inside ( ).)
—: Not applicable
Applicability (applicable version)
(Ver. 1.04 or later)
(Ver. 1.20 or later)
—
—
—
2 4 2 5
Version information (Example: Ver. 2.51)
PLC type (Example: 24 = FX
Date when production was stopped
June 30, 2002
1.3 Communication Type Applicability in PLC
The link device range is limited.
The link device range is limited.
N:N Network is not provided.
N:N Network is not provided.
The high speed link mode is supported in Ver. 3.07 and
later.
The high speed link mode is supported in Ver. 3.07 and
later.
N:N Network is not provided.
1
, FX , FX
2N 3U 2NC
Maintenance is offered within 7 years from the
end of production (until June 30, 2009).
1 Outline
Remarks
or FX Series)
3UC
Remarks
C-5
A
B
C
D
E
F
G
H
I
Apx.