Mitsubishi FX3U-232-BD User Manual page 641

FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
6. How to Setup Modems on the Personal Computer Side
for Remote Access
This chapter explains how to set a modem connected to the personal computer for remote access.
The setting method using GX Developer and the setting method using FXGP/WIN are explained respectively.
Remote access side
Personal computer
This chapter explains the setting procedure
for this side.
6.1 Setting Using GX Developer
This section explains the line connection setting method using GX Developer.
6.1.1 Registering AT command for connected modem
This subsection explains how to register the AT command for initializing a modem connected to the personal
computer.
1
Setting the AT command
Select [Tools] - [Set TEL data] - [AT command registration] from the toolbar to display the following
dialog box.
→ For applicable programming tools, refer to Subsection 1.4.2.
general telephone
line, etc.
Cable
Modem
6 How to Setup Modems on the Personal Computer Side for Remote Access
PLC side
Line
Modem
The setting procedure for this side is
explained in Chapter 5.
6.1 Setting Using GX Developer
Cable
PLC
I-31
A
B
C
D
E
F
G
H
I
Apx.