Table of Contents
Advertisement
Amcrest View Pro App Setup
The Amcrest View Pro app allows instant access to all live camera streams from any location. The
app supports a multitude of features and includes both a plug -and-play setup as well as a manual
network setup. Please note, AI features provided by the DVR can only be modified using the
local or web UIs and cannot be adjusted using the Amcrest View Pro app.
The Amcrest View Pro app can be downloaded in both the App Store and Play Store.
Before the DVR can be accessed through the app using the easy plug -and-play method (P2P
Setup), P2P must be enabled on the DVR.
Enabling P2P on the DVR
P2P should be enabled on your device by default, however, to check if P2P is enabled, please
follow the information provided below.
1. Log into your DVR and access the Main Menu.
2. In the Management section, click on Network then click on P2P. Ensure the Enable toggle
switch is enabled and the P2P status says "Online". This indicates the P2P option is enabled.
The following steps will continue the app setup process for an Android phone and, though the
iPhone version of the app has slightly different steps, most of this process is identical and easy.
1. Download and install the Amcrest View Pro app for the App Store or Google Play Store.
2. Open the app on your mobile device and allow the app to load.
3. Tap "Start".
4. Tap "DVR/NVR".
36
Advertisement
Table of Contents
