Access Web Interface - Amcrest 960H User Manual

8 Access Web Interface

Smart Client is designed to access and control single DVR. Compared with CMS, it has less
functions and much easier for user. You can also access your DVR by browser. It is similar to Smart
Client.
8.1 Login to Your Device
To access your device, you need to login first.
1. Scan all the devices in your local area network by clicking Search. Then double click one device
from the list. Or you can manually input the device IP address/Domain name/UID.
2. Input the user name and password.
3. Select main stream or sub-stream for live view. If your device is in internet, it's recommended to
select Sub-stream. Sub-stream has much lower bitrate than main stream, but main stream has much
better image quality.
4. Click Login, then you will connect the device to live-view.
Note:
For a detailed operation introduction, please refer to our resource CD included in your package
for the electronic version of the User's Manual.
This quick start guide is for reference only. Slight differences may be found in the user interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their respective
owners.
If there is any uncertainty or controversy, please refer to us for the final explanation.
Please visit our website or contact your local service engineer for more information.