Table of Contents
Advertisement
▪
o
IP addresses automatically have spaces before or after the address removed as they are
entered.
o
For adding a single IP, enter it in the Start Address field. For entering in a section of IP
addresses, enter in IP addresses in both fields, ensuring that the larger number IP address is in
the End Address field.
o
Note: The system also supports the adding of MAC addresses.
•
Delete: This button allows a user to remove a specific IP address from the IP Filter list.
button allows a user to edit start or end addresses.
To revert to default settings, click the Default button near the bottom left hand corner. To test the current
settings, click Test near the bottom left hand corner. To confirm settings, click the OK button near the
bottom right hand corner. To cancel any modifications, click the Cancel button near the bottom right hand
corner. To apply the settings, click the Apply button near the bottom right hand corner.
4.10.2.6 Email
This screen allows for the configuring of email settings to permit the DVR to send emails when the connected
cameras or alarms are triggered. Below is a screenshot of the email settings screen:
Below is an explanation of the fields on the Email settings screen:
•
Enable: This checkbox allows the user to enable the email feature.
•
SMTP Server: SMTP stands for Simple Mail Transfer Protocol. This field allows the user to enter the
SMTP server used by the email service.
•
Port: This field allows the user to enter the port that corresponds to the selected SMTP server.
•
User Name: This field allows the user to enter the username used to login to the selected SMTP server.
•
Password: This field allows the user to enter the password associated with the SMTP username.
•
Sender: This field allows the user to enter the sender email address. This email address will be the one
that sends out all emails pertaining to the alerts and alarm emails sent by the DVR.
•
Receiver: This field allows the user to enter the receiver email address. These email addresses are the
ones that will receive any emails pertaining to alert and alarm emails sent by the DVR. Up to 3 email
addresses can be entered in this field.
aa:0000: 00: 00aa: 00aa: 00aa: 00aa: 00aa can be optimized
to aa: aa: aa: aa: aa: aa: aa
Edit: This
79
Advertisement
Table of Contents
