4.4 Image Calibrate Tab
Use the Image Calibrate tab to control the position of the printable area in relation to the card.
Use the Vertical and Horizontal image position controls to adjust the position of the overall print area
to be precisely centered on a card. The maximum value for the Vertical and Horizontal adjustments is
±100 pixels (10 pixels = approx 0.03%, 0.8 mm).
Field
Vertical
Horizontal
48
Printer Preferences
Description
Enter a positive number to move the image toward the rear of the printer, Enter a
negative number to move the image toward the front of the printer.
Enter a positive number to move the image toward the rear of the printer. Enter a
negative number to move the image toward the front of the printer.
PLT-03159, Rev A.0
September 2017