IAI SP-20000C-USB User Manual page 78

SP-20000M-USB / SP-20000C-USB
(5) Sequence ROI Offset Y
Set Offset Y of sequence ROI.
Sequence ROI Binning Vertical =1 (Off):
Setting range is 0 to (3840 - [Sequence ROI Height])
Sequence ROI Binning Vertical =2 (On):
Setting range is 0 to (1920 - [Sequence ROI Height])
The limitations of step number and other factors are the same as the normal ROI mode set by
[Video Send Mode] ="Normal".
(6) Sequence ROI Gain Selector
In Sequence ROI Gain Selector, the gain settings for each index are available.
SP-20000C-USB: Gain (ALL), Red, and Blue can be set.
SP-20000M-USB: Only Gain is displayed and can be set.
(7) Sequence ROI Black Level
Black Level setting is available for each index.
(8) Sequence ROI Exposure Time
Exposure Time setting is available for each index.
(9) Sequence ROI Binning Horizontal
ON or OFF of Horizontal Binning for each index can be set.
(10) Sequence ROI Binning Vertical
ON or OFF of Vertical Binning for each index can be set.
(11) Sequence ROI LUT Enable
Enable or disable of LUT function for each index 0 to 9 can be set.
(12) Sequence ROI Frame Count
This can set how many times the seleted index is repeated. This is applied to each index.
Triggers are input according to numbers set in Frame Count and index is repeated and moves
to the next index. Therefore, the same number of triggers as Frame Count must be input.
(13) Sequence ROI Next Index
When Command Sequence is selected in the [Video Send Mode] selector, it is possible to
use this parameter to set the index which will execute after the currently
executing index. In this case, after the acquisition starts and the external trigger is input,
the index table always starts from index 0. Accordingly, after the repeated cycle of index
0 set by Frame Count is completed, the next index can be set as required. However, if
Sequence ROI Next Index is set to OFF, the index is not changed and only the Sequence
Repetition parameter is applied.
- 76 -