Trigger Selector; Trigger Mode; Triggersource - IAI SP-20000C-USB User Manual

7.3.1

Trigger Selector

Selects the trigger operation. In the SP-20000-USB, the following trigger operation can be
selected as the trigger.
Table – 26 Trigger selector
Trigger Selector Item
Frame Start
Acquisition Start
Acqusition End
Acqusition Transfer Start
7.3.2

Trigger Mode

Select either free-running operation or external trigger operation.
OFF: Self-running operation
ON: External trigger operation
7.3.1

TriggerSource

Select the trigger source to be used for trigger operation from the following table.
Table – 27 Trigger Source
Trigger Source Item
Low
High
Soft Trigger
PulseGenerator0 Out
PulseGenerator1 Out
Line 4 - TTL 1 In
Line -5 – OPTO IN 1
Nand 0 Out
Nand1 Out
User Output 0
User Output 1
User Output 2
User Output 3
Line 10 TTL IN 2
Line 11 LVDS IN
SP-20000M-USB / SP-20000C-USB
Description
Frame Start Trigger operation
Acqusition Start Trigger operation
Acqusition End Trigger operation
Delayed readout of the Video by Acquisition Transfer
Start Trigger
Description
Connect LOW level signal to the selected trigger operation
Default setting
Connect HIGH level signal to the selected trigger operation
Connect Soft Trigger signal to the selected trigger operation
Trigger can be input manually by the execution of the software trigger
Trigger software is available on each trigger source.
Connect Pulse generator 0 signal to the selected trigger operation
Connect Pulse generator 1 signal to the selected trigger operation
Connect TTL 1 IN signal to the selected trigger operation
Connect OPTO IN 1 signal to the selected trigger operation
Connect NAND 0 OUT signal to the selected trigger operation
Connect NAND 1 OUT signal to the selected trigger operation
Connect User Output 0 signal to the selected trigger operation.
0 or 1 status can be sent by User 0 command from PC(Host side).
Connect User Output 1 signal to the selected trigger operation.
0 or 1 status can be sent by User 0 command from PC(Host side).
Connect User Output 2 signal to the selected trigger operation.
0 or 1 status can be sent by User 0 command from PC(Host side).
Connect User Output 3 signal to the selected trigger operation.
0 or 1 status can be sent by User 0 command from PC(Host side).
Connect TTL 2 IN signal to Line 10
Connect LVDS 1 IN signal to Line 11
- 48 -