IAI SP-20000C-USB User Manual page 33

6.3.3 ROI (Region Of Interest)
In the SP-20000-USB, a subset of the image can be output by setting Width, Height, Offset-X, and
Offset-Y. If the height is decreased, the number of lines read out is decreased and as the result, the
frame rate is increased. However, in the horizontal directon, the horizontal frequency is not changed if
the width is decreased. In the SP-20000-USB, the minimum width is "8" and minimum height is "2".
Setting example (1)
Binning Horizontal = 1
Binning Vertical
Mirroring = Off
Setting example (2)
Binning Horizontal = 2
Binning Vertical
Mirroring = Off
SP-20000M-USB / SP-20000C-USB
= 1
OffsetY
Height
= 2
OffsetY
Height
OffsetX
Width Width
5120 Width Max
Fig. 18 Setting example (No binning)
Readout area
Width
OffsetX
2560 Width Max
Note: Binning is available only for
SP-20000M-USB.
Binning can be used in horizontal,
vertical, or both directions.
Fig.19 Setting example (with Binning)
- 31 -
Readout area