Setting The Reading Conditions; Placing The Object To Be Scanned On The Stage - GE HEALTHCARE Typhoon FLA 7000 User Manual

To...
Read a fluorescent sample
Read a phosphorimaging sample
Read a digitization sample
9.5

Setting the reading conditions

Set the reading conditions by following the instructions in Chapter 10 Reading conditions,
display parameters, and other settings, on page 77.
9.6

Placing the object to be scanned on the stage

Placing a gel sample on the Fluor
stage
Note:
Step
1
Typhoon FLA 7000 User Manual 28-9607-62 AC
CAUTION
Always wear gloves, protective glasses and a lab coat or similar
when handling samples.
•
The sample must not be thicker than 30 mm. For solutions, the
maximum height is 4 mm.
•
Make sure there are no bubbles or gaps on the contact surface.
Action
Place the sample on the Fluor stage.
9 Operation
9.4 Selecting the reading mode
Click this button
69