Adjusting The Display Parameters - GE HEALTHCARE Typhoon FLA 7000 User Manual

Note:
Note:
9.9

Adjusting the display parameters

Step
1
2
Typhoon FLA 7000 User Manual 28-9607-62 AC
If you click the Stop button during reading, the part that has not been
read yet will be saved as an image with a data value of 0 (light intensity
of 0).
When you click the Stop button, the reading is aborted. You cannot
start reading again from the location where reading stopped.
Action
Adjust the display parameters if desired. Follow the instructions in Section10.2
Display parameters explained, on page 81.
Click Return to return to the Reader Settings screen.
9 Operation
9.8 Scanning the sample
75