GE HEALTHCARE Typhoon FLA 7000 User Manual page 83

Setting
Correction
Mode
ND Filter
Scan Mode
File Format
Launch Appli-
cation
Typhoon FLA 7000 User Manual 28-9607-62 AC
10 Reading conditions, display parameters, and other settings
Description
Auto: Use specific image shading correction data that were adjusted
in accordance with each laser.
Manual: The correction method must be selected individually in the
Reader Settings window.
The correction mode settings list is registered by
Note:
a serviceman. Please contact the dealer where
you purchased Typhoon FLA 7000, or contact GE
Healthcare.
Enables the use of an ND filter to adjust the light intensity. Use the
ND filter if the signal from the sample is very strong.
Select On to enable the ND filter. Select Off to disable the ND filter.
Determines the scanning speed.
Standard Mode: 200 μm/210 s, 100 μm/210 s, 50 μm/330 s, 25
μm/450 s.
Quick Mode: 200 μm/150 s, 100 μm/150 s, 50 μm/210 s, 25 μm/330
s.
Determines the file format used to save the reading data.
Gel Image File (*.gel): The standard file format is a .gel file which
contains square root encoded pixel data.
Gel Image File (*.gel) + Tiff Image File (*.tif): In combination with a
.gel file, a read image can also be saved in TIFF file format. For TIFF
files, image data type is always set to Linear format.
Contains the path to the application used to analyze the data.
Select the analysis application by clicking the Select... button. Then
browse to the software executable and click OK.
10.3 Other settings
83